Schneider Electric
Conext XW+ Stacking Kit

The Conext XW+ Connection Kit is required for connecting a second or third XW+ Inverter/Charger in the same system.**This new kit does NOT come with AC breakers. Please see Add-Ons section to order Dual-Pole or Three-Pole Breaker Kits.

**NOTE: This kit is also used for stacking the XW+ Inverters with the old XW Inverters. Be sure to update the firmware first. The firmware on the XW+ needs to be updated to the XW firmware.

It includes the following:

• XW+ Conduit Box (UL) - for attaching the bottom of 2nd or 3rd XW+ Inverter/Charger
• 4 Conduit Bushings for AC wiring knockouts, AC Sync, and Xanbus knockouts
• DC positive busbar for up to 3 DC disconnect breakers.  Replaces factory-installed busbar.
• 250 Amp 160 VDC circuit breaker
• Plastic cable ties **THESE ARE NOT INCLUDED as part of this product- just to secure parts in shipment - Schneider has NOT updated their documentation yet.
• 2 #4/0 AWG DC Battery cables for connecting  2nd or 3rd XW+ Inverter/Charger to Power Distribution Panel
• 5 #6 AWG cables for Grid, Load, and Neutral AC connections (labeled)
• #4 AWG cable for grounding **THE MATERIALS LIST SAYS #2 AWG grounding cable - Schneider has NOT updated their documentation yet.  ***They are now using Polar Wire, which has a higher amperage rating than standard THWN wire often used.  The #2 wire THWN wire is listed for 115A, whereas the #4 Polar Wire is listed for 150A.
• AC Sync and Xanbus cables for network communication
• Shipping weight of box is 23 lbs.  Dimensions are 13 in × 12 in × 17.5 in.