Home / Shop

- Description
- Specifications
MidNite Solar CLASSIC 200 MPPT Charge Controller
The Classic 200 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 200 has a maximum output current of 79 amps, an operating voltage of 200 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 200 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
FEATURES:
- 200 operating voltage
- Max current out: 79 amps
- ETL listed to UL1741 and CSA
- Terminals are rated for 75 C
- Type 1 environmental rating
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Detector
- Solar, wind and hydro MPPT modes
Ships with MidNite Battery Temperature Sensor (MNBTS) and printed Manual.
Model Number | Classic 200 |
Charge Controller Type | MPPT |
Battery voltage nominal | 12/24/36/48/60/72V |
Maximum charging current | 79 A |
Maximum open circuit voltage | 200V + HyperVOC |
Typical Efficiency | 98% |
Load Control | yes |
LVD | yes |
Equalization Charge | yes |
Battery Type | Lead acid (Flooded/gel/AGM) |
Class 1 Div 2 | no |
Min. operating temperature | -40C |
Dimensions (l x w x h) | 14.9” x 6” x 4” |
Weight (Shipping weight) | 12lb (15 lb) |
Warranty | 5 years |
We can get a product for you even if it isn’t listed here!
Renewable Energy’s are beginning to go mainstream. There is renewed interest and recognition by utilities of finite resources in coal, natural gas and nuclear energy. Alternatives are an attractive choice to the conscientious consumer.
We stay committed to providing our customers with products at affordable prices, good service, low shipping costs and knowledgeable technical support. We are looking forward to provide you with your renewable energy needs!
